Copy to clipboard
Pure Storage on Equinix Metal¶
To meet certain customers' storage needs, Equinix Metal™ offers single-tenant, high-performance, hosted Pure Storage FlashArray appliances.
In general, using Pure Storage is a high-touch process that can be very closely tailored to your specific use-case. This purpose of this documentation is to provide an overview of the steps involved in getting set up and resources to help guide you towards implementing what you need. Please reach out to support should you have any questions or need help.
Pure Storage appliances are available in all Metros where Equinix Metal is available.
Ordering an Appliance¶
Ordering, pricing, and fulfillment of Pure Storage appliances is handled through a sales and hardware reservation process. If you are interested, please reach out through our webform. Contact information is also available if you download the solutions brief.
When you order an appliance, we will arrange for it to be located in racks physically near to your current Equinix Metal infrastructure. If you are also ordering new servers to connect to the appliance, we will arrange them to be located within the networking requirements.
We will also collect some technical information from you in order to pre-configure some of the networking on the appliance. You will be asked to provide six IP addresses in a private subnet range in order to assign IP addresses to the appliances. Please keep track of these IP addresses, as you will need them to configure the networking between your Equinix Metal server and the appliance.
Provisioning the Appliance¶
After ordering your Pure Storage appliances, and the order has been fulfilled, you can provision them by navigating to the Servers tab, clicking +Add New Server and selecting Reserved.
The appliances will be labeled Custom Storage Appliance, and will be available for the location you specified in your order. Give it a Hostname and the only option for the OS field will be Custom/Manual. Remember that the appliances come in sets of two, so click Add Row to provision the second one, giving it its own Hostname.
Click Deploy Now to start the process.
Typically, you will need at least one Equinix Metal server to connect to the storage appliances and where you can mount partitions and formatted drives. This can be a server that is already part of your existing infrastructure on Equinix Metal, or one that was set up when you ordered your appliances. The configuration examples in this document are intended to be rather generic, on a single
c3.small.x86 server running Ubuntu 20.04.
Pure Storage has a similar set of docs with examples on a cluster of
c3.medium.x86 servers running VMware ESXi 7.0.
Setting Up the Layer 2 Networking¶
Connectivity between the Pure Storage appliances and your servers happens over Layer 2.
Creating the VLANs¶
To connect the server to the storage appliances, you will need to create three VLANs on Equinix Metal, in the same Metro where your server and storage appliances live. One of them will be a management VLAN, and the other two VLANs will be used for the iSCSI interfaces, so it may be helpful to label them accordingly at creation time.
A note on VLAN ID numbers. If you create your VLANs through the console, the number is auto-assigned. If you want to specify the VLAN ID, you can by creating the VLANs through the API.
Connecting the VLANs to the Appliances¶
Each of the appliances are pre-configured in a pure Layer 2 unbonded mode with three ports,
eth5. The IP Addresses that you provided when ordering are assigned to each port on each device. The table presents an example configuration for both appliances.
|Appliance 1||Appliance 2|
|Role||Port||IP Address||Role||Port||IP Address|
| || ||192.168.10.10|| || ||192.168.10.11|
| || ||192.168.1.10|| || ||192.168.1.11|
| || ||192.168.2.10|| || ||192.168.2.11|
Now, on each of the storage appliances you will need to connect the three VLANs to the three ports, one VLAN on each port. From the Pure Storage appliance's Overview, go to the Network page. Click + Add a New VLAN and select the port and VLAN to connect to it from the drop-downs.
When you have added all three VLANs to an appliance the Network page should have a list of the three VLANs and which ports they are connected to.
Repeat the process on the other appliance.
Connecting the VLANs to the Server¶
For setting up the Layer 2 networking on the server, use Hybrid Bonded mode and attach all three VLANs to the
bond0 interface. General documentation for using Hybrid Bonded mode and configuration is on the Hybrid Bonded documentation page. The example on this page is specific to using Hybrid Bonded mode to connect to a Pure Storage appliance.
First, you need to set the networking mode to Hybrid Bonded mode and attach the management VLAN to the
bond0 interface. From the server's Network page, click Convert to Other Network Type, select Hybrid Bonded, and choose to attach the management VLAN to the port.
Then, you can attach both the iSCSI VLANs. From the server's Network page, in the Layer 2 section, click Add New VLAN. Add both VLANs to
Configuring VLANs in the OS¶
The last piece is configuring the networking in the server's OS, including assigning IP addresses for the server on each VLAN, and tagging each VLANs traffic. The trick for assigning IP addresses on the server is that you want the IP address for the server to use the same
192.168.x.x space for the address as the appliances on each VLAN.
For reference, the table presents an example mapping of all the ports and IP addresses across the appliances and sever.
|Appliance 1||Appliance 2||Server|
|Role||Port||IP Address||IP Address||Port.VLAN||IP Address|
| || ||192.168.10.10||192.168.10.11|| ||192.168.10.15|
| || ||192.168.1.10||192.168.1.11|| ||192.168.1.15|
| || ||192.168.2.10||192.168.2.11|| ||192.168.2.15|
Once you have all the information mapped out, you will need to add it to your server's networking configuration. To continue with the example server running Ubuntu 20.04, add the IP addresses and tag the VLAN traffic by adding the configuration to
/etc/network/interfaces. For example,
auto bond0.1000 iface bond0.1000 inet static address 192.168.10.15 netmask 255.255.255.0 auto bond0.1001 iface bond0.1001 inet static address 192.168.1.15 netmask 255.255.255.0 auto bond0.1002 iface bond0.1002 inet static address 192.168.2.15 netmask 255.255.255.0
Then bring up the interfaces with
ifup bond0.1000 ifup bond0.1001 ifup bond0.1002
Once the networking configuration is updated, you should be able to ping the Pure Storage appliances from the server. SSH into the management server, and use
fping to ping all six of the IP addresses of the appliances. For example,
ssh root@<server_public_ip> fping 192.168.10.10 192.168.1.10 192.168.2.10 192.168.10.11 192.168.1.11 192.168.2.11
Connecting to the Pure Storage Interface¶
The Pure Storage management interface is accessible from either of the appliances IP addresses on the management VLAN, at port 443. To connect to it, you can set up SSH port forwarding and forward the traffic from one of the management appliance IP addresses to your local machine. For example,
ssh -L 12345:192.168.10.10:443 root@<server_public_ip>
Then, use browser on local machine to visit
localhost:12345. You should see the Pure Storage log-in page.
Using Pure Storage¶
You are now at the point where you can start configuring Pure Storage to meet your storage use-case. If you're interested in sticking with Linux, the Pure Storage documentation has many resources like, recommended settings, how to configure Linux for iSCSI in their larger Linux Platform Guide.
There's also a nice guide on their blog that includes some basic information on using the management interface with Red Hat flavored Linux as the example operating system.
Even More Resources¶
If you are looking for more, the Pure Storage Solutions documentation has many other platforms and use-cases, including an Equinix Metal + VMware guide with examples on a cluster of
c3.medium.x86 servers running VMware ESXi 7.0.
There's also something for those interested in using Windows.
As a final step in the process, Equinix Metal sales and support will help you configure secure external routing for your appliances, which will enable them to call home and receive remote assistance.
From a high-level, this process involves:
- Using an Equinix Metal servers that you have already provisioned to run a virtual router, or dedicating a new
c3.smallto serve as a virtual router.
- Using Equinix Network Edge product for Internet connectivity.
- Configuring the router and firewall to allow outgoing messages.
This piece can be very closely tailored to your specific use-case, infrastructure, and security requirements. Please reach out to sales or support should you have any questions or would like to discuss what this might look like for your specific needs.